News, Analysis, Trends, Management Innovations for
Clinical Laboratories and Pathology Groups

Hosted by Robert Michel

News, Analysis, Trends, Management Innovations for
Clinical Laboratories and Pathology Groups

Hosted by Robert Michel
Sign In

InspectIR COVID-19 Breathalyzer identifies a chemical signature associated with SARS-CoV-2 in about three minutes with 91.2% sensitivity and 99.3% specificity

One company is hoping that it can make breathalyzers a viable, easier way to screen for SARS-CoV-2. It will soon have the opportunity to learn if consumers will accept this form of screening for COVID-19, as its device recently obtained an Emergency Use Authorization from the FDA.

On April 14, 2022, InspectIR Systems, LLC, of Frisco, Texas, was granted the US Food and Drug Administration’s first-ever emergency use authorization (EUA202006) for a portable breath test device designed to screen for SARS-CoV-2 infection. Clinical laboratories that perform COVID-19 testing will want to compare the high-level sensitivity of this breath test compared to rapid antigen tests currently used for COVID-19 screening.

The InspectIR COVID-19 Breathalyzer uses gas chromatography-mass spectrometry to identify mixtures of five volatile organic compounds (VOCs) uniquely associated with the disease, the FDA said in a news release announcing the EUA.

The device is about the size of a carry-on suitcase. It provides test results in less than three minutes and is currently authorized for use with subjects who are 18 or older.

The FDA’s EUA limits use of the device to “a qualified, trained operator under the supervision of a healthcare provider licensed or authorized by state law to prescribe tests,” the federal agency said. The test “can be performed in environments where the patient specimen is both collected and analyzed, such as doctor’s offices, hospitals, and mobile testing sites.”

Jeffrey Shuren, MD, JD
The InspectIR COVID-19 Breathalyzer device “is yet another example of the rapid innovation occurring with diagnostic tests for COVID-19,” said Jeffrey Shuren, MD, JD (above), director of the FDA’s Center for Devices and Radiological Health (CDRH), in the news release. A portable device that can identify SARS-CoV-2 infections in a few minutes with 91% specificity may be of great interest to clinical laboratory companies operating COVID-19 popup testing sites around the nation. (Photo copyright: US Food and Drug Administration.)

In granting the authorization, the FDA cited results of a study with 2,409 participants in which the test had sensitivity (correct positive results) of 91.2% and specificity (correct negative results) of 99.3%. “The test performed with similar sensitivity in a follow-up clinical study focused on the Omicron variant,” the agency stated.

“The FDA continues to support the development of novel COVID-19 tests with the goal of advancing technologies that can help address the current pandemic and better position the US for the next public health emergency,” said Jeffrey Shuren, MD, JD, director of the FDA’s Center for Devices and Radiological Health (CDRH), in the news release.

In its coverage of the EUA, CNET noted that the InspectIR breath test is more sensitive than rapid antigen tests but not as sensitive as PCR tests. The FDA advised that people who receive a positive test result with the InspectIR COVID-19 Breathalyzer should follow up with a PCR molecular test.

How the InspectIR COVID-19 Breathalyzer Works

InspectIR LLC was founded in 2017 by Tim Wing and John Redmond, Forbes reported. Their original goal was to develop a breathalyzer for detection of cannabis or opioid use. However, with the onset of the COVID-19 pandemic, the entrepreneurs decided to adapt the technology into a SARS-CoV-2 diagnostic test.

Lacking a background in chemistry, they turned to Guido Verbeck, PhD, head of the University of North Texas Laboratory of Imaging Mass Spectrometry (UNT-LIMS) in Denton, Texas, to help develop the breath test.

As described in the FDA’s EUA documents, a subject breathes into the device using a sterilized one-time-use straw. A pre-concentrator collects and concentrates the five targeted VOCs, all from the ketone and aldehyde families of organic compounds. These go to a Residual Gas Analyzer, and an algorithm determines whether the sample contains the chemical signature associated with a SARS-CoV-2 infection.

Redmond told Forbes that the specific mix of VOCs is proprietary. The article notes that Wing, Redmond, and Verbeck have patented the pre-concentrator technology.

The devices are manufactured at a Pfeiffer Vacuum Inc. facility in Indiana. The InspectIR founders told Forbes they expect to produce 100 units per week in a start-up phase with plans to ramp up as sales increase. They also plan to look at applications for other respiratory diseases.

InspectIR has not announced exact pricing, but Time reports that the company will lease the equipment to clients, and that pricing per test will be comparable to rapid antigen tests.

InspectIR’s first breathalyzer device is receiving much positive coverage from the media. Should it prove to effective at spotting COVID-19 at popup testing sites, it may supplant traditional clinical laboratory rapid antigen tests as the screening test of choice.   

Stephen Beale

Related Information:

Coronavirus (COVID-19) Update: FDA Authorizes First COVID-19 Diagnostic Test Using Breath Samples

The First COVID-19 Breathalyzer Test Is Coming to the US

Frisco Startup Gets FDA Approval on COVID Breathalyzer after Teaming Up with UNT Researcher

Meet the Founders of the $2.7 Million Startup Behind the New COVID Breathalyzer

FDA Authorizes First COVID-19 Breath Test

How a New Breath Test Could Make Mass COVID Testing Easier

FDA Authorizes First COVID-19 Breath Test Meet the InspectIR COVID-19 Breathalyzer Test Just Authorized by the FDA

;